Did your TV stop working and you are not sure if it is the lamp? Did you install a new lamp and your TV is not working properly? View
our troubleshooting/repair guide to help you identify the problem.
Just click on button above to begin the guide. We hope you will find this helpful.
Click on the link below to purchase this lamp. DLPLampXpress.com offers factory original lamps at great prices with a 1 year warranty and FREE UPS shipping included. Orders received by 3 PM CST will ship same business day!
Purchasing
the lamp only and replacing the bad lamp in your existing housing is a
very cost effective way that can save you up to hundreds of dollars.
The lamp installation is simple and takes only minutes to complete. The
plastic housing surrounding
the lamp is completely reusable. Picture quality and brightness will
not be affected by reusing the housing. We can safely say that because
we have thoroughly tested this
on every lamp we give advice on. If you do purchase the complete lamp
in housing you should have your old lamp housing recycled because it
contains mercury. It is also against many state laws to throw this
product in the trash. It is highly recommended when you purchase a
lamp replacement to buy a factory original OEM
(original equipment manufacturer) lamp. The two manufacturers of lamps
that TV companies use are Osram and Philips. Some
companies may debate
that Philips lamps are better than Osram or vice versa, but that is
only opinion (or sales tactics) as there are no statistics proving
one is better than the other. We have extensively tested (over 25,000
testing hours) each brand and neither
performs better or lasts longer than the other. Purchasing a lamp
of
any other brand is an "OEM compatible", generic, or aftermarket lamp
(DNGO, APO). This is not advised because these lamps have a fraction
of the lamp life and can possibly damage your TV.
Detailed written instructions and a video of the lamp installation are for provided below showing how to replace the lamp in the 4930V00301 housing.
1)
Please use the included latex-free glove when handling the
lamp.Failure to use the glove during
handling may reduce the life of the lamp.The TV must be unplugged from the outlet before removal of the
lamp.It must stay unplugged until you
are completely finished.
Use your
TV’s user manual to help you find and access your lamp housing.If you do not have the TV user manual, you
can download and/or view it on the TV manufacturer’s website.
2)Remove the
visible screws necessary to expose the lamp. Note how the lamp is mounted to the housing
and remove the required screws to free the lamp.After lamp removal, seat the new lamp into
the position and secure it in the manner as the old one with the removed
screws. Install the leads on the new lamp by screwing the nut and washer in
place to secure the first lead on the top of the lamp.The post on the top of the lamp is very fragile. DO NOT OVER TIGHTEN AND USE CARE OR DAMAGE MAY OCCUR. Companies will not warranty installation damage. The second lead will screw in place on the
metal tab on the side of the lamp.IMPORTANT:Please secure the metal tab on the lamp with your fingers while
installing the screw because excessive force may break the lamp.Damage to the lamp through installation will
void your warranty.Reassemble the
housing back together with the previously removed screws.
3)After reinstalling
your lamp into the TV, completely reassemble the TV.All lamp doors or anything else removed to
remove the lamp from the TV must be replaced before plugging the TV back in and
turning on.Failure to do so will not
allow the TV to turn on properly.Please
reference your TV’s user manual to reset the lamp timer.
