Gateway 75005089 / All Gateway DLP TV Lamp Replacement
Did your TV stop working and you are not sure if it is the lamp? Did you install a new lamp and your TV is not working properly? View
our troubleshooting/repair guide to help you identify the problem.
Just click on button above to begin the guide. We hope you will find this helpful.
Written instructions are for provided below showing how to replace the lamp in the 75005089 / All Gateway DLP TV lamp housings.
1)Please use
the included latex-free glove when handling the lamp.Failure to use the glove during handling may
reduce the life of the lamp.The TV must
be unplugged from the outlet before removal of the lamp.It must stay unplugged until you are
completely finished.Use your TV’s user
manual to help you find and access your lamp housing.If you do not have the TV user manual, you
can download and/or view it on the TV manufacturer’s website.
2)Note how the
lamp is mounted to the housing and remove the required screws to free the lamp.After lamp removal, seat the new lamp into
the position and secure it in the manner as the old one with the removed
screws.
3)Install the
leads on the new lamp by screwing the nut and washer in place to secure the
first lead on the top of the lamp.The
second lead will screw in place on the metal tab on the side of the lamp.IMPORTANT:Please secure the metal tab on the lamp with
your fingers while installing the screw because excessive force may break the
lamp.Damage to the lamp through
installation will void your warranty.
4)After
reinstalling your lamp into the TV, completely reassemble the TV.All lamp doors or anything else removed to
remove the lamp from the TV must be replaced before plugging the TV back in and
turning on.Failure to do so will not
allow the TV to turn on properly.Please
reference your TV’s user manual to reset the lamp timer.
