1)         Please use the included latex-free glove when handling the lamp.  Failure to use the glove during handling may reduce the life of the lamp.  The TV must be unplugged from the outlet before removal of the lamp.  It must stay unplugged until you are completely finished. Use your TV’s user manual to help you find and access your lamp housing.  If you do not have the TV user manual, you can download and/or view it on the TV manufacturer’s website.

2)         There are two screws on the black bottom of the housing underneath to remove that will allow you to remove the metal cover over the lamp.  Remove the two screws that hold the lamp connector in place and free the connector of the housing.

3)         There are four metal tabs with screws holding them in place that need to be removed.  The lamp will now be able to come free of the housing.  Note how the lamp is seated in the housing and put the replacement in the same exact way.  Install the four metal tabs and screws to hold the lamp in place.  Put the new lamp in the same place as the old one.     

4)         Reinstall the four metal tabs and screws to hold the new lamp in place.  Put the lamp connector of the new lamp in the previously used spot and secure it with the previously used two screws.  Put the metal cover back on over the lamp and secure it with the two previously used screws underneath on the bottom of the housing.

5)         After reinstalling your lamp into the TV, completely reassemble the TV.  All lamp doors or anything else removed to remove the lamp from the TV must be replaced before plugging the TV back in and turning on.  Failure to do so will not allow the TV to turn on properly.  Please reference your TV’s user manual to reset the lamp timer.